Results 1 to 9 of 9

  1. #1

    JRUNNER - Initializing Nand....Header is wrong

    My 1st attempt @ a JTAG:

    I've been wading through google about this to try and find the answer - but I've reached the point where I'm about to give up!!

    OK here goes:

    so I've got a XENON with Dash 7371, I've soldered on all the SPI USB connections - I'm running XP with all drivers loaded etc.

    The 1st time I ran J Runner it did 4 passes reading the NAND. Couldn't believe I'd managed to get it working! However the message 'Header is wrong' appeared for pass 2, 3 & 4.
    I ran it again overwriting files this time with 2 passes (I got a GUI message saying that this shouldn't happen for stock NAND!).
    I ignored it as I couldn't find anything on google and the text box said that the NANDS matched.

    Next I chose JTAG in XeBuild options and then 'Create Xell reloaded' which created Xenon.bin.
    When I came to write XellReloaded it again told me that the Header was wrong - but it still wrote.

    I then tested Link and got just a blinking green light with no display.

    Any help please?
    Thanks

  2. #2
    Member IHorney89's Avatar
    Join Date
    Oct 2012
    Location
    Scotland
    Thanks
    2,136

    Re: JRUNNER - Initializing Nand....Header is wrong

    Something to do with your original nand image

  3. #3

    Re: JRUNNER - Initializing Nand....Header is wrong

    What do you think my next steps should be?

  4. #4
    Member IHorney89's Avatar
    Join Date
    Oct 2012
    Location
    Scotland
    Thanks
    2,136

    Re: JRUNNER - Initializing Nand....Header is wrong

    Not entirely sure. I will search a little

    Edit
    Link
    Link
    Last edited by IHorney89; 03-30-2013 at 01:58 PM.

  5. Thanked by:
     Jay

  6. #5

    Re: JRUNNER - Initializing Nand....Header is wrong

    Thanks for links.
    Both my nanddump1&2 have header problems when selected in Jrunner so it doesn't look like i've got my original NAND.
    Therefore I presume I'll need a donor NAND and rebuild it?
    Do you know how to do this?

  7. #6
    Old Timer
    Diamond
    Jay's Avatar
    My Mojo So Dope
    Join Date
    Sep 2010
    Location
    New York
    Thanks
    3,481

    Re: JRUNNER - Initializing Nand....Header is wrong

    Best of luck to you man.

    Link

    Link




    "He was the single most hopeful man I've ever met...and likely to never meet again."

  8. #7

    Re: JRUNNER - Initializing Nand....Header is wrong

    Problem is I've never been able to boot xbox since reading NAND so I don't have CPU key to integrate with donor.

  9. #8
    i did the same thing as this guy and my xbox wont turn on its a slim trinity that's what jrunner changes the nand to it when it says header wrong I need help who ever *SNIP* and dso I have the qsb v3 installed and the cr4 xl installed and I have the jr programmer like I said if someone get me the right files to fix my nand and get my xbox 360 once again booting again I will give them $100 or more
    Last edited by dschaf; 06-17-2015 at 07:34 PM.

  10. #9
    Community Manager
    Horizon Pro
    Chris's Avatar
    No it's Becky
    Join Date
    Sep 2010
    Location
    Florida
    Thanks
    14,578
    Please don't bump old threads and do not offer money especially that kind of money. You might as well just buy a new RGH with it.

    Closed.

Similar Threads

  1. I need a Tumblr Header.
    By GnarlyOCMD in forum Graphic Design
    Replies: 0
    Last Post: 01-22-2013, 08:22 PM
  2. Rate the header out of ten?
    By Major Marshee in forum Graphic Design
    Replies: 8
    Last Post: 01-26-2012, 04:26 AM
  3. [REQ]Header for website!
    By Finisher in forum Graphic Design
    Replies: 0
    Last Post: 07-04-2011, 12:14 PM
  4. C# Con Header
    By Gyarados in forum Programming
    Replies: 19
    Last Post: 02-23-2011, 06:22 PM
  5. Hockey Header
    By Hova in forum Graphic Design
    Replies: 0
    Last Post: 02-17-2011, 07:31 AM